UV Steriliser
Fully submersible UV‑C lamp assembly
Suitable for aquarium, sump or filter-chamber installation
Programmable operating time from 0 to 8 hours
Adjustable in 30-minute increments
Programmable interval from 0 to 8 days
Trade prices and ordering are available to approved business customers only.
Log in Apply for a trade accountOverview ›
The LGND Aurora UV‑C Internal Steriliser is a fully submersible UV‑C unit designed to help maintain clear and healthy aquarium water. UV‑C light at approximately 253.7 nm helps control free-floating algae and microorganisms as water circulates around the lamp housing.
The Aurora can be installed inside an aquarium, sump or permanently filled filter chamber. Its programmable controller allows an operating time of up to 8 hours to be selected in 30-minute increments, together with adjustable interval-day settings. A six-segment indicator monitors the calculated UV‑C lamp service life.
The compact housing, high-grade quartz glass and waterproof silicone sealing system provide reliable submerged operation. The unit can be installed vertically or horizontally using the supplied suction cups.
Key Features ›
- Fully submersible UV‑C lamp assembly
- Suitable for aquarium, sump or filter-chamber installation
- Programmable operating time from 0 to 8 hours
- Adjustable in 30-minute increments
- Programmable interval from 0 to 8 days
- Healthy and High-Efficiency operating modes
- Six-segment lamp-life indicator
- Button-lock function
- High-grade quartz glass construction
- UV-resistant protective housing
- Waterproof silicone sealing system
- Vertical or horizontal installation
- Supplied suction cups for secure mounting
- Designed for continuous water circulation around the unit
Technical Specifications ›
| Model | Aurora 5W-U1S |
| Rated power | 5 W |
| Rated voltage | 220–240 V AC |
| Frequency | 50/60 Hz |
| Recommended aquarium volume | 30–200 L |
| UV‑C wavelength | Approximately 253.7 nm |
| Operating-time range | 0–8 hours |
| Time adjustment | 30-minute increments |
| Interval setting | 0–8 days |
| Installation | Fully submersible lamp assembly |
| Mounting position | Vertical or horizontal |
| Maximum water temperature | 35°C |
| Model | Aurora 11W-U2S |
| Rated power | 11 W |
| Rated voltage | 220–240 V AC |
| Frequency | 50/60 Hz |
| Recommended aquarium volume | 200–1,000 L |
| UV‑C wavelength | Approximately 253.7 nm |
| Operating-time range | 0–8 hours |
| Time adjustment | 30-minute increments |
| Interval setting | 0–8 days |
| Installation | Fully submersible lamp assembly |
| Mounting position | Vertical or horizontal |
| Maximum water temperature | 35°C |
Directions ›
Attach the LGND Aurora vertically to the side or rear glass of the aquarium using the supplied suction cups. Position the unit in an area with strong water circulation, preferably close to the filter outlet, so that water flows freely around the protective housing.
Ensure that the complete UV‑C lamp assembly is fully submerged and that the housing openings remain unobstructed. Install the unit where fish and other aquarium inhabitants cannot come into direct contact with the lamp or the UV‑C light emitted through the housing openings.
Install the Aurora inside a sump chamber that remains permanently filled with water. The unit may be attached vertically to the side or rear glass or installed horizontally on the bottom of the chamber.
Position it in an area with strong and continuous water circulation. Ensure that the complete lamp assembly is fully submerged and that the protective housing openings are not obstructed by equipment, substrate or other objects.
Refer to the supplied operating manual for controller settings, operation, cleaning and maintenance instructions.
FAQ ›
Where can the Aurora be installed?
Does the complete appliance go underwater?
Can it be installed vertically and horizontally?
Does the Aurora include a water pump?
How long can it operate each day?
Does it replace the aquarium filter?
Why is the water not becoming clear?
Where can I find the complete operating instructions?
Safety ›
Download Safety Data Sheet (SDS)
Important Safety Instructions
- ⚠ Never look directly or indirectly into the UV‑C light.
- ⚠ Fully submerge the UV‑C lamp assembly before switching it on.
- ⚠ Never operate the unit outside the water or without adequate water circulation.
- ⚠ Keep the controller, mains plug and all electrical connections completely dry.
- ⚠ Install the unit where aquarium inhabitants cannot come into direct contact with the lamp or emitted UV‑C light.
- ⚠ Always switch off and unplug the appliance before cleaning, maintenance or removal from the water.
- ⚠ Do not use the appliance if the housing, quartz glass, cable, controller or plug is damaged.
- ⚠ Read the supplied operating manual before installation and use.