Supplements
Adjusts pH to 7.2—8.5
Designed for use in planted aquariums
Increases alkalinity
Contains no phosphate
Trade prices and ordering are available to approved business customers only.
Log in Apply for a trade accountOverview
Legend Al-Qali™ is a zero-phosphate buffer to raise pH and alkalinity (KH) and buffer with Legend Saleratus™. These buffers are designed for the planted aquarium or for very hard water where phosphate buffers may pose an algae or cloudiness problem. Legend Al-Qali™ increases the pH value to a maximum of 8.5. It is gentle, safe, and enhances the freshwater environment.
To increase pH, use 1 teaspoon (≈ 5 mL) for every 80 L daily until desired pH is reached (this dose raises alkalinity by about 0.7 meq/L (≈ 2 dKH)).
In order to adjust pH gradually, use Legend Al-Qali™ with Legend Saleratus™. When using Legend Al-Qali™ & Legend Saleratus™ together to target a specific pH, utilize the ratio chart in Directions.
Sizes: 300 g, 600 g, 1 kg, 1.5 kg
Directions
Use
To increase pH, add 1 teaspoon per 80 L daily until the desired pH is reached (this dose typically increases alkalinity by about 0.7 meq/L, approximately 2 dKH).
For gradual pH adjustment, use Legend Al-Qali™ together with Legend Saleratus™. When targeting a specific pH, use the ratio chart as a starting point, then fine-tune based on your water chemistry.
Hint: First determine how much Legend Al-Qali™ is needed for your water volume based on your alkalinity (KH) target. Then use the ratio chart to estimate the complementary amount of Legend Saleratus™ to help stabilize your target pH.
Ratio chart (starting point)
This chart is a general guide. Ratios may need adjustment depending on source water and buffering capacity.
Conversion reference: 1 meq/L ≈ 2.8 dKH (so 2 meq/L ≈ 5.6 dKH). If your test kit reads in dKH, divide the dKH value by 2.8 to estimate meq/L. Always adjust gradually and re-test between doses.
FAQ
Is your Al-Qali™ a sodium bicarbonate?
A: Yes, it is a sodium bicarbonate-based buffer.
What is Al-Qali™?
A: Al-Qali™ is a non-phosphate buffer to raise pH and alkalinity (KH). It is intended for setups where phosphate buffers may contribute to algae or cloudiness. It buffers between 7.2 and 8.5.
How do I use Al-Qali™?
A: Use 1 teaspoon per 80 L daily until the desired pH is reached. For gradual adjustment and pH targeting, use Al-Qali™ together with Saleratus™.
Can't find what you're looking for? Ask us a new question. One of our technical support staff will respond.
Safety
Protect from frost and heat. Keep out of reach of children and pets.
Storage: At room temperature. Protect from frost and heat.
Use: For fertilization of ornamental plants in an aquarium only.
See the pack for detailed dosage recommendations.
Note: Official guidance recommendations take precedence.